Remove the slide assembly from your unit and clean as needed based on your manufacturing applications and usage.
Wipe chips and coolant from the unit with a clean rag. Apply a light coating of oil to the coverplate prior to reassembly.
Inspect the third-hand mechanism for chip build up.
If chips have accumulated between the clamping block and slide nut, remove both bolts and clean thoroughly.
If the unit is difficult to operate even after performing routine maintenance, the slide assembly should be completely disassembled and inspected.
Replace all damaged parts
The clamping action of the slide assembly is very efficient. Do not exceed recommended maximum torque.
Use only the provided swivel wrench or a torque wrench to operate the unit. Do not use extensions or hammers. The Warranty does not cover damage caused by over-tightening.
